how to implement wifi direct between windows 10 and linux (ubuntu)


I’m trying to establish WIFI DIRECT connection between windows 10 and Linux (ubuntu).
I’m following steps as per the below link.

https://answers.microsoft.com/en-us/windows/forum/all/how-to-implement-wifi-direct-between-windows10-and/4ca49250-38a0-4327-9f39-47284a9af800.

My Linux side configuration file

root@var-som-mx6:~# cat /etc/wpa_supplicant/wpa_supplicant.conf 
ctrl_interface=/var/run/wpa_supplicant
update_config=1
device_name=LZ_50
device_type=2-0050F204-1
p2p_listen_reg_class=81
p2p_listen_channel=1
p2p_oper_reg_class=81
p2p_oper_channel=1
p2p_go_intent=1
p2p_no_group_iface=1

network={
    ssid="test"
    psk="test@123"
}

network={
    ssid="DIRECT-b3"
    bssid=2c:6b:7d:0c:73:62
    psk="Fcvpxj3L"
    proto=RSN
    key_mgmt=WPA-PSK
    pairwise=CCMP
    auth_alg=OPEN
    mode=3
    disabled=2
}

I can successfully communicate between Linux to Linux using wifi direct.
Now when I trying to establish communication between Windows and Linux. it is failing and its logs are as per below.

     <3>RX-PROBE-REQUEST sa=4c:34:88:38:5f:50 signal=-66 
    <3>RX-PROBE-REQUEST sa=4c:34:88:38:5f:50 signal=-65 
    <3>RX-PROBE-REQUEST sa=4c:34:88:38:5f:50 signal=-66 
    <3>RX-PROBE-REQUEST sa=4c:34:88:38:5f:50 signal=-70 
    <3>RX-PROBE-REQUEST sa=4c:34:88:38:5f:50 signal=-67 
    <3>RX-PROBE-REQUEST sa=4c:34:88:38:5f:50 signal=-68 
    <3>RX-PROBE-REQUEST sa=4c:34:88:38:5f:50 signal=-67 
    <3>RX-PROBE-REQUEST sa=4c:34:88:38:5f:50 signal=-66 
    <3>RX-PROBE-REQUEST sa=4c:34:88:38:5f:50 signal=-67 
    <3>RX-PROBE-REQUEST sa=4c:34:88:38:5f:50 signal=-66 
    <3>RX-PROBE-REQUEST sa=4c:34:88:38:5f:50 signal=-65 
    <3>WPS-ENROLLEE-SEEN 4c:34:88:38:5f:50 c696bebc-ff55-4051-aac8-d19cf290002b 1-0050F200-0 0x11e8 0 0 (DESKTOP-KM641DF) <3>RX-PROBE-REQUEST sa=4c:34:88:38:5f:50 signal=-60 
    <3>CTRL-EVENT-EAP-STARTED 4e:34:88:38:5f:4f 
    <3>CTRL-EVENT-EAP-PROPOSED-METHOD vendor=0 method=1 
    <3>CTRL-EVENT-EAP-STARTED 4e:34:88:38:5f:4f 
    <3>CTRL-EVENT-EAP-PROPOSED-METHOD vendor=0 method=1 
    <3>CTRL-EVENT-EAP-PROPOSED-METHOD vendor=14122 method=254 
    <3>WPS-REG-SUCCESS 4e:34:88:38:5f:4f c696bebc-ff55-4051-aac8-d19cf290002b 
    <3>WPS-SUCCESS 
<3>CTRL-EVENT-EAP-FAILURE 4e:34:88:38:5f:4f 
    <3>WPS-ENROLLEE-SEEN 4c:34:88:38:5f:50 c696bebc-ff55-4051-aac8-d19cf290002b 1-0050F200-0 0x11e8 0 0 (DESKTOP-KM641DF) 
<3>RX-PROBE-REQUEST sa=4c:34:88:38:5f:50 signal=-58

1) is my connection steps are correct?

2) is my configuration file is correct?

Thank you for your time!!