Mobile Network – An error message 21 is displayed when attempting to send an SMS message to Speed ​​Dial 567676 with Airtel SIM and Lenovo K5 note phone

With Active Pack on Airtel you will receive a daily free SMS to a 10-digit mobile number. However, the package does not cover the speed dial of SMS. Shortcut SMS costs 3 rupees per message. So make sure you have enough credit by dialing * 121 * 2 #, then typing 1 and sending. If the balance is less than 3 rubles, sending an SMS to the short code will fail and the error code will be 21. Below is an example of issuing the account balance check. If the account balance is less than 3 rubles, top up 10 rubles to get the talk time (account balance) of 7.47 rubies. Now try to resend the SMS and it should succeed. You'll also see a 3 Ruby pop-up that has been debited from your account.

Bal: Rs0.53

Unlimited calls, daily 1.4 GB & 100 SMS

Pack Valid until: 02-09-2019

1434 MB left of the daily limit of 2048 MB

Beginner – Project Euler # 21 Friendly Numbers Python

Let d (n) be defined as the sum of the correct divisors of n (numbers less than n that divide equally in n).
If d (a) = b and d (b) = a, where a ≠ b, then a and b are a friendly pair and each of a and b is called
friendly numbers.

For example, the correct divisors of 220 are 1, 2, 4, 5, 10, 11, 20, 22, 44, 55 and 110; therefore, d (220) = 284.
The correct divisors of 284 are 1, 2, 4, 71, and 142; so d (284) = 220.

Rate the sum of all friendly numbers below 10000. Here is my implementation in Python. I need your feedback on how this can be improved.

from time import time


def get_divisors (n):
Returns divisor of n.
Divider = 2
while divisor * divisor <= n:
if n% divisor == 0 and n // divisor! = Divisor:
income divider
if n // divisor! = divisor:
Yield n // divisor
Divisor + = 1
Yield 1


def get_sum_amicable (n, divs = {2: 1}):
"" Gives seal of approval below n. ""
for number 1 in the range (s):
for number 2 in the area (number 1):
To attempt:
if divs[number2] == number1 and divs[number1] == number2:
Yield number1
Yield number2
except KeyError:
divs[number1] = sum (get_divisors (number1))
divs[number2] = sum (get_divisors (number2))
if divs[number2] == number1 and divs[number1] == number2:
Yield number1
Yield number2


if __name__ == & # 39; __ main __ & # 39 ;:
start = time ()
print (sum (get_sum_amicable (10000)))
print (f # Time: {time () - start} seconds. & # 39;

21 Wallpaper Remove Photoshop for $ 1

21 Wallpaper Remove Photoshop

Dear Sirs, ___Thank you for watching my performance ——- I have more than 4 years experience with Adobe Photoshop. I remove the background of 21 pictures in Deliver (3 hours). Only $ 5. *** Unlimited revisions up to 100% customer satisfaction *** (100% satisfaction guaranteed) 1- Removing the background of photos.2-Adding and removing objects from.3-White background for Amazon product images.4- Resizing and cropping of images.5-REMOVING BACKGROUND /CHANGING.6-Resizing / Resizing.7-Reuching your photos.8- Shadow effects.9-Transparent background.10-Removing unwanted objects.100% Customer SatisfactionSuperfast Very fast delivery (3 hours ) Many Thanks
P L E A S E O R D E R NOW

,

magento 2.1 – Added article in the quote table, but the shopping cart page is empty

I have a strange problem: when I add a product to the shopping cart, it is added to the quotes table, but an empty shopping cart is displayed on the shopping cart page. Can someone be faced with the same problem? Besides, I can not log in to admin. The page will be updated without login. So I suspect something related to the session or the cache?

Sequences and Series – $ A = frac {1} {1} + frac {1} {10} + frac {1} {11} + dots + frac {1} {19} + frac {1 } {21} + frac {1} {31} + dots + frac {1} {91} + frac {1} {100} + frac {1} {101} + dots $

Consider the series:

$ A = frac {1} {1} + frac {1} {10} + frac {1} {11} + frac {1} {12} + dots + frac {1} {19} + frac {1} {21} + frac {1} {31} + frac {1} {41} + dots + frac {1} {91} + frac {1} {100} + frac {1} {101} + frac {1} {102} + dots $

The counter of each term is $ 1 $, and the denominators are the natural numbers that contain the numeral $ 1 $,

If the denominators are the natural numbers instead, omit the digits that contain the numeral $ 9 $ is called Kempner series, it converges too $ 22.92067661926415034816 … $,

What is the value of $ A $?

does $ A $ have an exact shape?

3 i 2012, rm

BlackHatKings: proxy lists
Posted by: ThomasLound
Post Time: June 30, 2019 at 1:53 pm.

magento 2.1 – Mageento2 – New order e-mail for us

We have an extension that sends a new order email to our own private mailbox. What is different from those that customers receive.
We print these mails automatically on a receipt printer.

We use Magento 2.1.16.

However, not all orders are printed.
Canceled and sometimes regular orders will not be printed.

This extension is given up by its developer … so I have to figure it out myself.

Can someone look at this?

I think this file takes care of sending …. Observer / NewEmail.php

inlineTranslation = $ inlineTranslation;
$ this -> _ storeManager = $ storeManager;
$ this -> _ transportBuilder = $ transportBuilder;
$ this -> _ scopeConfig = $ scopeConfig;
$ this-> order = $ order;
$ this-> dataHelper = $ dataHelper;
$ this-> curHelper = $ curHelper;
$ this-> paymentHelper = $ paymentHelper;
$ this-> addressRenderer = $ addressRenderer;
$ this-> identityContainer = $ identityContainer;
}

/ **
* Private method for sending emails
* /
protected _sendEmail function ($ from, $ to, $ templateId, $ vars, $ store, $ area =  Magento  Framework  App  Area :: AREA_FRONTEND) {
$ this-> inlineTranslation-> suspend ();
$ this -> _ transportBuilder
-> setTemplateIdentifier ($ templateId)
-> setTemplateOptions ([
                    'area' => $area,
                    'store' => $store->getId()
                ])
-> setTemplateVars ($ vars)
-> setFrom ($ from)
-> addTo ($ to['email'], $ to['name']);
$ transport = $ this -> _ transportBuilder-> getTransport ();
$ transport-> sendMessage ();

$ this-> inlineTranslation-> resume ();

return true;
}

/ **
* Received payment info block as HTML
*
* @param order $ order
* @return string
* /
public function getPaymentHtml ($ order)
{
return $ this-> paymentHelper-> getInfoBlockHtml (
$ order-> getPayment (),
$ this-> identityContainer-> getStore () -> getStoreId ()
);
}

/ **
* @param order $ order
* @return string | zero
* /
public function getFormattedShippingAddress ($ order)
{
Return $ order-> getIsVirtual ()
? zero
: $ this-> addressRenderer-> format ($ order-> getShippingAddress (), & # 39; html & # 39;);
}

/ **
* @param order $ order
* @return string | zero
* /
public function getFormattedBillingAddress ($ order)
{
return $ this-> addressRenderer-> format ($ order-> getBillingAddress (), & # 39; html & # 39;);
}

/ **
*
* @param  Magento  Framework  Event  Observer $ observer
* @return $ this
* /
public function execute ( Magento  Framework  Event  Observer $ observer) {
$ isNewOrderEnable = $ this-> dataHelper-> getConfigVal (& # 39; adminemailsection / generalgroup / enabled & # 39;);

// Check if the email notification for new orders is enabled
if ($ isNewOrderEnable) {

// Set current order details
$ orderIds = $ observer-> getEvent () -> getOrderIds ();
$ order = $ this-> order-> load ($ orderIds);
$ orderIncId = $ order-> getIncrementId ();

// set e-mail configuration options
$ store = $ this -> _ storeManager-> getStore ();
$ from = $ this-> dataHelper-> getConfigVal (& # 39; adminemailssection / generalgroup / send_from & # 39;);
$ to = [
                'email' => $this->dataHelper->getConfigVal('adminemailssection/generalgroup/email'),
                'name' => 'Administrator'
            ];
$ templateId = $ this-> dataHelper-> getConfigVal (& # 39; adminemailssection / generalgroup / template & # 39;);

// start set template vars
$ transport = [
                'order' => $order,
                'billing' => $order->getBillingAddress(),
                'payment_html' => $this->getPaymentHtml($order),
                'store' => $order->getStore(),
                'formattedShippingAddress' => $this->getFormattedShippingAddress($order),
                'formattedBillingAddress' => $this->getFormattedBillingAddress($order),
            ];

$ transport = new  Magento  Framework  DataObject ($ transport);
$ vars = $ transport-> getData ();

// Call e-mail function with the necessary parameters
$ this -> _ sendEmail ($ from, $ to, $ templateId, $ vars, $ store);
}
}
}

Assembler – Using the Int 21 42h to read a file

If you try to move me to the next line with the int 21 42H, that expression will be printed blank. I already tried to move with AL 00 and AL 01. It only seems to work with AL 02. How do you go to the next line to do the first read? At the moment I try to switch to the second line and print the R. The confusion arises when I have to manipulate CX: DX. It never moves forward, let alone down.

Code:

; ————————————————– —————————-
tiny model

.data

Filename db "boolean.txt", 0

bufferSize = 512

File handle Dw?

buffer db 200 dup (?)

.code

                Org 0100H

start: program start

CALL init

CALL open

CALL cursor

Read CALL

CALL show

Close CALL

Wait for CALL

CALL ends

INT 20H

; Initialize the screen

init: MOV AH, 00H

            MOV AL, 03H

INT 10H

RET

We are waiting for a key

Waiting: MOV AH, 07H

                                                INT 21H

RET           

We finished the program

End: MOV AX, 4C00H

                                                INT 21H

RET

We opened the program

open: MOV AH, 3DH

                                MOV AL, 0H

MOV DX, offset filename

INT 21H

MOV file handle, AX

RET   

; We move the cursor in the file.

Cursor: MOV AH, 42H

                                                MOV AL, 00H

MOV BX, filehandle

MOV CX, 1

MOV DX, 1

INT 21H

RET        

; Read the file

was: MOV AH, 3FH

                            MOV BX, filehandle

MOV DX, offset buffer

INT 21H; AX will let the bytes be transferred

RET

We close the file

close: MOV AH, 3EH

                                    MOV BX, filehandle

INT 21H

RET 

; We show

show: MOV AH, 09H

                                    MOV AL, DS:[buffer]

         MOV BL, 2EH

MOV DX, 0000H

MOV CX, 0001H

INT 10H

RET

; ————————————————– —————————-
End of start; End of the program

File in question:

1 question? $

Answer 1 $

Answer 2 $

Answer $ 3

Answer 4 $