film – Troubleshooting the development of Portra 800

I've just done a shoot with a single role Portra 800, new from Amazon.

Time-properly developed with refilled Fuji C-41 chemistry in a Jobo 1500 tank.

I measured the film at ISO 640, spot metering for the face.

Digital recording context, same ISO setting, same recording method.

Here are some negatives from the first & # 39; part of the roll.
Negative 1 (completely unchanged)
Negative 1 (automatic color correction)
Negative 2 (completely unchanged)
Negative 2 (automatic color correction)

I literally mixed just new batches of developer, bleach, and fixer with the right amount of replenisher and starter as usual.

What on earth is happening here? Any advice would be very grateful. Thanks a lot!

App Windows – Lumenzia 8.0.0 (Win / macOS) | NulledTeam UnderGround

Lumenzia – Luminosity Masking Panel | File size: 114.53 MB

Luminosity masks let you create beautiful and realistic edits in Photoshop. With Lumenzia you can use them quickly and easily. The advanced JavaScript engine overcomes the full complexity of luminance masking in the background. So you just have to think about beautiful pictures.
In case you do not want to get any further

How it works:

• Preview for easy selection of the correct preset or custom mask.
• Apply the preview as a selection or mask.
• Refine your location / color, clean rough edges, and paint the mask nondestructively for perfect results.

Key Benefits:
• Select everything visually and mask! Lumenzia gives you a full-screen preview of the mask before you apply it. Click interactively on the image to select (or deselect) the desired tones / colors. No guesswork when adding and removing channels. Isolate the mask with a simple selection on certain parts of the image. You can also combine group masks to see the overall effect of the mask. It has never been faster and easier to create or adjust the right mask. The masks are created in 16-bit resolution, so that smooth transitions are possible even with extreme masks.
• Click to choose! You do not need to know which mask to use. Just use the built-in zone and area tools to automatically create the right mask.
• It stays out of the way. Lumenzia offers a compact control panel with only the keys you need, eliminating the need for a range of channels. So there is enough space on a laptop screen to see your pictures big and beautiful. Each action in Lumenzia creates just a single history step that lets you undo everything -Z. And since Lumenzia is programmed in JavaScript, it's smart enough to fix bugs and other tricky situations for you.
• Simplify the exposure compensation. Stack, align, and sort your fade-in exposures automatically from light to dark.
• Smaller files. Lumenzia does not use channels, so your files stay small. In addition, it offers BlendIf and vector masks to prevent the build-up of layer masks and a combination tool to reduce the effects of group masks. A typical TIF file on a Nikon D800 grows from 200 MB to 1.4 GB when creating channel masks, but it retains the same size of 200 MB in Lumenzia. And Lumenzia can combine group masks to significantly reduce file size. This often reduces the file size by 20-50%!
• Beautiful vignettes with ease. Simply draw a selection around the target area to create a vignette of any size, sharpness or position in the image. The vignette can be slightly modified, inverted (to lighten the center), or combined with luminosity masks (to avoid too much darkness).

Lumenzia properties:
• Optimized workflow and fully custom masks
• BlendIf and Vector masks (to save significant memory and avoid updating masks)
• The ability to view and edit brightness selections just like a layer mask
• Add, subtract, or cut a mask or advanced control selection
• Color masks (selection by color and / or brightness, visually)
• local contrast enhancement (brings out more details easily and automatically)
Live masks (look at the mixed result immediately and try different masks)
• Zone masks for precise refinement
• Zone and area selection (visually select the right mask by clicking on the image)
• Zone maps to visualize the image in zones 0-10.
• Lighter / Darker masks (select pixels relative to surrounding pixels)
• Refine the masks in certain places or colors in the picture
• combine masks (merge group masks to save space and see exactly what is masked)
• Path support to facilitate the use of hard-edged luminosity masks in architecture
• Split screen to display the mask and image at the same time
• "PreBlend" for automatically stacking, aligning and sorting exposures for mixing
• A utility to store files> 4GB that can be viewed in Lightroom
• Custom vignettes
• Dodge and burn
• Non-destructive sponge tool (advanced saturation paint)
• Saturation masks (color-specific vibration control)
• Apply or replace masks on existing layers with a single click
• Luminosity and dust visualization tools that make it easy to find and fix bugs
• Advanced sharpening methods for portraits (surface blur) and landscapes (high pass)
• Recordable actions to include light and dark masks / selections in your own actions.
• Training and support videos and a comprehensive written manual


System requirements:

Lumenzia is compatible with Photoshop CS6 – CC 2018+ on both Windows and OSX. Lumenzia does not support CS5 or earlier versions (but you can try my free Luminosity Masking Panel / Actions instead). Note that the CS6 UI has the same function but looks a little different.


Downloading UploadGig

Download RapidgatorDownload of Nitroflare

In case you do not want to get any further

graphics card – 800 watt power supply with 6 pin and a few pci-e connections but my mobo has only 4 pin atx

I have an asus m5a97 le r2.0 mobo and a 800 watt power supply with a 6 pin molex and a pci-e molex split into two 6 pin molex and one 2 pin. The above-mentioned mobo has a four-pin atx connector. Should I use the red 6-pin connector with two side-hanging plugs or should I use one of the 6-pin PCI-E strands there and leave the other 6-pin plug unused and use the 2-pin plug for newer graphics cards, for who possibly has a stain? THE PCI-E 2 PIN slot? I apologize for the section of all capital letters that was accidental and will not reenter it. I hope to get an answer, although this is 2019. Thanks, Tab

CentOS 7 VPS with 30 GB RAM and 800 GB SSD storage for $ 50

    CentOS 7 VPS with 30 GB RAM and 800 GB SSD memory

    100% full SSD CentOS 7 VPS
    * Maximum data transfer rate: In this vServer, only SSDs are used as hard disk space.
    * High performance inside: Our VPS are powered by Intel Xeon processors.
    * CentOS 7

    Dedicated Linux VPS server with full SSH access for 30 days. No Ram Burst Technologies!

    CPU: 8 cores
    Intel Xeon E5-2620v3, E5-2630v4 or 4114 processor
    30 GB RAM (guaranteed)
    800 GB of hard disk space (100% SSD)
    100% SSD storage space
    UNLIMITED traffic!
    600 Mbps port
    DDoS protection
    SSH root access
    1 IP included
    1 snapshot included

    , (tagsToTranslate) Linux (t) Cenots (t) SSH (t) SSD (t) Hosting (t) Domain

    United Airlines Reservations – +1 800 894 4802 – Advertising, Offers

    United airline is known for its great facilities and excellent luxury hospitality on the flights. If you are planning a trip with your family or friends, you want to book tickets under budget. Then, without confusion, you can grab the airline's airline tickets and enjoy traveling. The airlines offer passengers first-class facilities and services to make their journey as comfortable as possible. Now, to take such luxury and comfort service, you can visit that Official reservation page of United Airlines Book tickets at a low price. There you will receive help from a professional and experienced team that knows everything. We understand the feeling of booking tickets under budget so that employees can offer the best deals for travelers.

    See more…

    American Airlines Reservations

    Alaska Airlines Reservations

    Delta Airlines reservations

    United Airlines Reservations

    Cheap airline tickets

    Book cheap flights, buy tickets

    35 mm – Do you want to use a Kodak Vision 500T film with ISO 400 or 800?

    The Rem-Jet coating (removable deep black pad) is a dispersion of lamp black (carbon black) in a binder of cellular acetate phthalate. This binder is an "acidic plastic". It can be softened and washed off with an alkaline solution. The machine process uses a pre-bath to temporarily cure the film to better withstand transport in a fast-moving film processor. The pre-bath softens the Rem-Jet and the rotating rollers, much like the ink rollers that are washed off the Rem-Jet.

    With a well-washed T-shirt you can make an alkaline solution and polish your hands. This can be done if the film has been processed before drying. Water 27 to 38 ° C (80 to 100 ° F) 800 ml 800 ml borax solution 15 g / l use 20 g sodium sulfate (anhydrous) 100 g sodium hydroxide 1.0 g water to make 1 liter

    The Rem-Jet is used to protect the film from exposure from behind. Many film cameras with viewfinder through the lens let light through when the photographer looked away. It serves as an anti-halo support. It protects the film when loading and unloading large rolls in subdued light.

    Does anyone know if removing the prayer for exposure has an effect on the film speed? If so, why is that?

    BLP_bbot indexing at a madness rate, one of the sites I host. 800 Gb / month


    Last night I opened a log file to see why this site uses so much bandwidth (~ 800 GB / month). It's a corporate website, and the number of actual visitors is very low. The website is pretty old. But I do not understand what's going on with this bot. In the log files, I could only see requests for PDF files in a minute, but also 40 requests for different PDFs … and that goes every minute.

    Someone else has seen this behavior BLP_bbot ?

    Bandwidth usage, last day, month, year, as you can see in the picture below, bandwidth usage has dropped to 0 since last night. Last night I banned the IPs used by BLP_bbot…by_BRP_bot.jpg

    Here is the list of robots in Awstats. For example, you can see the big difference between an unknown bot and a Google bot.


    Robots/Spiders visitors (Top 25)   -   Full list   -   Last visit	 
    35 different robots*	Hits	Bandwidth	Last visit
    Unknown robot identified by bot*	964,028+197	685.73 GB	29 Jul 2019 - 23:00    <---------- !!!!!!!
    empty user agent string			4,290+4		432.05 MB	27 Jul 2019 - 21:42
    crawl					3,255+7		71.51 MB	25 Jul 2019 - 20:14
    MJ12bot					2,432+264	55.13 MB	29 Jul 2019 - 21:25
    SemrushBot				1,022+615	23.03 MB	29 Jul 2019 - 22:26
    bingbot					1,482+88	504.05 MB	29 Jul 2019 - 22:39
    DotBot					619+660		191.54 MB	29 Jul 2019 - 22:51
    Googlebot				537+45		148.78 MB	29 Jul 2019 - 18:52

    Awstats I think removes the bandwidth usage by bots from the MONTHLY statistics table. Below are the monthly real user statistics generated by Awstats.


    Month	Unique visitors	Number of visits	Pages	Hits	Bandwidth
    Jan 2019	427	1,203			5,725	10,927	1.49 GB
    Feb 2019	386	1,097			5,126	10,946	1.39 GB
    Mar 2019	457	1,168			7,354	12,681	1.42 GB
    Apr 2019	507	1,102			5,844	10,605	1.12 GB
    May 2019	646	1,333			8,163	12,158	636.76 MB
    Jun 2019	530	1,155			4,043	7,838	393.27 MB
    Jul 2019	379	742			2,807	5,507	329.93 MB

    PS. Webhosting Talk Forum has removed the ability to include images in posts? Hmm .. this is the first forum that disables uploading images