Windows 10 – Temporary problems burning NAS drives to BD-Rs. What am I missing?


situation


I do not know what to do … I have 3 Seagate Iron Wolf 6-TB NAS drives (mounted as a drive letter or logical path) and each time I burn data from those drives to a 25-drive BD-R drive GB (I tried it) Different manufacturers and have tried different file configurations (uncompressed and compressed and stretched in 1-GB blocks).

I know that my system is a bit old, but it does what I need to run ATMs.

Anyway, I can burn discs (DVD-R, DVD-R DL, BD-R) without any problems. Checking the compilation now causes the problem. What happens is that sometimes the disks check without problems. However, there will be times and it will happen more often than before. and the data is corrupt.


Relevant H / W and B / W specifications


  • System:
    • MB: ASUS Rampage IV Extreme
    • CPU: Intel I7 3930K
    • RAM: 32 GB (quad-channel)
    • GPU: 2x EVGA GTX 680
    • optical:
      • 1x LG WH14NS40 (v1.03) or
      • 2x LG WH16NS40 (v1.02)
    • HDD
      • 3x Seagate Barracuda 1 TB
      • 3x Seagate Iron Wolf 6TB
    • S / W uses:

What have I done?


  • Used Seagate Seatools:
    • CLEVER. Test exists on all drives
    • Short generic test passes all drives
    • Long Generic (at the time of this posting still in operation and had 10 hours 51 min. On the NAS drives.
  • Windows diagnostics used:
    • Power shell Repair-volume scanning The cmdlet did not find any errors on all NAS drives.
  • Ran Symantec Endpoint Protection on the main system drive and at the time of this release found to be about 70% complete with only two "PUA" (no serious threat)

My questions


  • So, what on earth do I miss?
  • With which b / w can I correctly diagnose this and finally fix it?
  • The NAS drives are still under warranty and are interchangeable if something is wrong, Seagate said. How do I find out if this is the case?

Conclusion


Thank you in advance!

dnd 5e – Is there a monster / plague that drives people crazy?

I am not aware of anything that increases your ability to attack or damage you, but I'm not sure if you're targeting people around you with Bloodthirst (or something similar).

There are some ways to do this with spells and monsters (which may have spells).

confusion effects

I should start with "confusion," the spell. Throw a W10 and get an effect:

1 The creature uses all its movements to move in a random direction. To determine the direction, roll a d8 and assign a direction to each cube face. The creature takes no action this turn.
2-6 The creature does not move this turn and takes no action.
7-8 The creature uses its action to make a melee attack on a randomly selected creature within its range. If no creature is within range, the creature does nothing this turn.
9-10 The creature can act and move normally.

Every "favorite" terrible bunch of mouths, The Gibbering Mouther,
Their general sound is enough to create a confusing effect:

…[snip]Dice with …[snip]…
1 to 4 the creature does nothing.
At 5 or 6, the creature takes no action or bonus action and moves with its entire movement in a random direction.
7 or 8, the creature melee attacks a randomly-targeted creature within its reach or does nothing if it can not make such an attack.

And I think the best option is here Crown of madness

…[snip]The enchanted target must use its action before moving in each of its rounds to make a melee attack against a creature you choose in spirit.[snip]…

Property and charm (remote property, in my opinion)

Your options here are rather limited, but they are monsters.

Ghosts (obviously) and Yakfolk from Storm King's Thunder can inhabit and control a body.

Neogi and succubus (Succubi?) Have charm effects that allow them to exercise control over a person. "They attack.", For example.


Special Mention: Berserkeraxt

A really classic cursed item that has the quality (among other things) that:

…[snip]Whenever an enemy creature damages you while the Ax is in your possession, you must cast a DC 15 Wisdom Rescue litter or become angry. While you are angry, you must use your action each turn to attack the creature near you with the ax[snip]…

Hard Disk – Daisy Chaining from two external hard drives

I've attached two external Glyph 1TB hard drives to my iMac from October 2015, 27-inch 5K display, Fusion HDD, OS 10.14.5

1 has a single partition and is intended for TM backups

The other one has two partitions: one for daily cloning of my iMac and the other for monthly cloning of my MB Pro.

The two are connected to each other via a Glyph FW cable and to my iMac via a FW Thunderbolt adapter

Lately, I've noticed that from time to time I'll notice that the glyphs do not appear on my desktop.

When I start the Disk Utility, sometimes I find it and press "mount".

Sometimes they are not found by DU, so I have to either turn them off / on or restart them.

I thought maybe something could be baffled by the cable that connects it to my iMac. That's why I shut it down and replaced the FW cable with a USB cable.

The only glyph that appears on my desktop is the drive to which the USB cable is connected.

Does not the FW pigtail connecting the two drives work with the USB cable that connects them to my iMac?

Thank you for any insights,

1 has a single partition and is intended for TM backups

The other one has two partitions: one for daily cloning of my iMac and the other for monthly cloning of my MB Pro.

The two are connected to each other via a Glyph FW cable and to my iMac via a FW Thunderbolt adapter

Lately, I've noticed that from time to time I'll notice that the glyphs do not appear on my desktop.

When I start the Disk Utility, sometimes I find it and press "mount".

Sometimes they are not found by DU, so I have to either turn them off / on or restart them.

I thought maybe something could be baffled by the cable that connects it to my iMac. That's why I shut it down and replaced the FW cable with a USB cable.

The only glyph that appears on my desktop is the drive to which the USB cable is connected.

Does not the FW pigtail connecting the two drives work with the USB cable that connects them to my iMac?

Thank you for any insights,

Are there specific recommendations for disabling USB drives?

I am currently discussing / considering the possibility of disabling access to USB (USB) drives on Windows computers.

There are technical resources for this, and I try to balance the arguments in the threat scenario.

PRO Remove USB drives

  • Ability to introduce malware (no malicious intent of the user)
  • Ability to introduce malware (user's malicious intent)
  • Ability to outsource data
  • Loss of unencrypted drive → possible loss of data
  • The attack can start from BadUsb

CON Remove USB drives

  • none (from a security perspective)
  • much (from a business point of view: data exchange with customers, outsourcing of large files)

There are also Counter arguments for the PRO section:

  • The part "ability" is not limited to USB drives, the data / virus transmission can be done via virtual means (virtual hard disks, e-mail, …).
  • The "unencrypted" issue can be resolved by requesting that encrypted drives be forcibly encrypted

My question: Are there specific recommendations for disabling USB drives?

palpable here means either "standards-based" (common sense optional) or "common sense".

MacOS Mojave can not be installed on an external drive. Error: This Mac can only install macOS on APFS formatted drives

I use the Install macOS Mojave.app Installer on my Mac mini (2018), running Mojave 10.14.5, to install Mojave on a formatted external laptop hard drive (a Toshiba model with a case).

I successfully formatted the drive with the Disk Utility in GUID format.

When you run the Mojave installer, the installation on the external drive is rejected with the following words:

This Mac can only install macOS on APFS formatted drives.

But I thought APFS was for solid-state drives only, not spinning drives. And there was no APFS option in Disk Utility that I could see.

➥ Is it now impossible to install and boot an external rotating drive?

Disk Utility – Why do I have two drives with the same amount of space?

that's a weird one. I have just bought a used MacBook and it turned out that when reinstalling macOS in the memory dialog a second drive was displayed. The very first thought was that the main drive is a 500 GB SSD and is partitioned into two. I went to Disk Utility and there were two different drives listed. I did not figure it out, but I continued the process and now, after a few days with the MBP, I see that the two drives have almost the same occupied space as a mirror.

All apps and operating systems were installed at the top of the Macintosh HD list. But now, I'll leave you some screenshots to help you see what's going on.

Many Thanks.

Enter image description here

TO EDIT:

These are mine discussion list Results. Many Thanks!

Enter image description here

Are you still on an old e3v5 / v6? Get a new Xeon E-2276g! 128/256/512 / 1TB Ram Deals! large NVMe drives

In addition to launching the Xeon E-22xx, we also have some random promos to show the kind of hardware we have. Here are a few different configurations available, from high-end 48-core Intel monsters to AMD dual-EPYCs, some storage nodes, GPU setups, large NVMe setups and so on. If you have customized requirements or would like to switch from another supplier to save money, please send an e-mail to our sales department. We've been making great deals on high-end hardware for over a decade!

**** Recently, almost 1 petabyte of 1 TB SSDs have been received. So let's make a deal for SSD storage We also have 1.2 TB and 3.8 TB Enterprise NVMe drives at hand! ****

**** The servers listed below are in our promotions in Utah, DC, LA. You will shortly receive an e-mail with your requirements. We will see what can be done. *****

Launch Specials for Intel Xeon E Coffee Lake ER!

Intel Xeon E-2276G – 6 cores 12 threads at 3.8 GHz with turbo up to 4.9 GHz> 16,000 Passmark!
16 GB DDR4 ECC
1TB Enterprise SSD
30 TB outgoing (incoming, not counting) over 1 Gbps port
$ 99 a month
Show us a better deal for this particular hardware with a network like ours!
Want a killer upgrade? Double the RAM to 32GB and add a 3.8TB NVMe drive to this server for just $ 50 more per month!

Intel i7-9700k – 8 Core-8 threads at 3.6 GHz with Turbo up to 4.7 GHz> 17,000 Passmark!
32 GB of DDR4 memory
Super fast Intel Enterprise 1.2 TB NVMe drive!
30 TB out over 1 Gbps port
$ 109 per month in Utah, + $ 30 for LA, but few in stock

Monster 48 / 96HT Core Intel Setup with 512GB RAM and many SSDs!
4x CPU Intel E5-4657Lv2 48x Real Cores 96 threads all at 2.4GHz
512 GB ECC memory, upgrade to 1 TB of RAM for another 300 USD per month.
8x 1TB Enterprise SSD with Hardware Raid
12TB enterprise drive at 7,200rpm
1 Gbps public port and 100 TB BW $ 399
IMPRESSIVE!

Amazing pop for Buck VPS node / Compute / ??? server
Intel Xeon 2680v2 20 / 40HT dual-CPU cores (older, but still massive CPU performance> 21,000 PM)
256 GB DDR3 Reg ECC RAM (RAM upgrades in stock)
4x 1TB Enterprise SSD with hardware raid
1x enterprise hard drive with 7,200 rpm and 4 TB
**** SSD Fast IO option with 24 x 1 TB, add an NVMe for more IOPs!
1 Gbit / s public port and 100 TB BW $ 279
IMPRESSIVE! Only a few left

AMD EPYC Dual CPU 7281 32/64 Core Monster as long as they last!
Dual CPU AMD EPYC 7281 32Cr / 64 thread 2.1 GHz
128 GB DDR4 registered ECC RAM (many memory upgrades in stock)
2x 1TB Enterprise SSD
1x 1.2 TB NVMe Enterprise
1 Gbps public port and 100 TB BW $ 299
IMPRESSIVE! – Only one left!

AMD Ryzen 7 2700 8 Core 16 thread
16GB DDR4 RAM upgrade to 32GB for $ 16 more and 64GB for $ 32 more per month!
1x 1TB Enterprise SSD (add a 1.2TB or 3.8TB NVMe drive cost-effectively to this server!)
This is on a real server board, nice setup. Ryzen 3000 is coming soon!
1 Gbps public port and 30 TB BW $ 99
IMPRESSIVE!

Nice inexpensive dual CPU E5 setup, dual e5-2630Lv2, 64GB RAM, 1TB Enterprise SSD $ 89 Only a few in stock!

Dual CPU Intel Xeon E5-2660v2 20/40 Core, 64GB RAM, 2x 1TB Enterprise SSD 50TB BW (out) $ 149 Many cores and SSD memory!

Intel Xeon E3-1240v3 32G RAM 1TB Enterprise SSD 30TB (out) BW on gig port $ 59

**** We are hard to beat on hardware RAID storage servers. If you have a better deal now, please pass it on and I bet we will beat it! 12/24/32 + drive setups. *****

Inexpensive entry-level server with good hardware raid $ 129!
Intel Xeon E3-1230, 16 GB DDR3 ECC RAM, 12 x 3 TB Enterprise Hard Drive with 1 GB Hardware Raid Cache and Cachecade 6/10 € 129 Bump on 32GB of RAM and 300GB of boot SSD for $ 15 more

Intel Xeon E3-1270, 16GB DDR3 ECC RAM, 72TB Raw, 12x6TB Enterprise SAS Hard Drive with Hardware Raid, 1GB Cache, Cachecade 6/10, $ 199 Bump to 32GB of RAM and 300GB of boot SSD for $ 15 more – Very limited stock, blowout price for lots of storage!

Tons of fast SSD storage on the latest Xeon E-CPU, if other specifications are needed!
Intel Xeon E-2276G, 32 GB DDR4 ECC RAM, 24x 1 TB enterprise SSD with hardware raid, 1 GB cache with Cachecade 6/10 (or JBOD) $ 199 Very limited inventory

** If you need more CPU power, you can upgrade to Dual E5
** Do you need more storage space? We can make bulk deals for them and make private connections at 10/25/40/100 gbps, larger drives up to 12TB, larger drives up to 45 or more drives possible.

You would like to deal with AI / Machine Learning / Crypto Mining? Tons of new options for you!
These are listed with basic model servers. We can build them up with high-end CPUs, more RAM, faster memory, and so on.

Simple, inexpensive server for messing around / learning GPU-based projects. Xeon x3460, 16GB DDR3 Ecc, 120GB Ssd and Nvidia 1050TI GPU $ 89
Intel Xeon X3460 4 cores
16 GB ddr3 ECC memory
128GB SSD
1x Nvidia 1050TI GPU
89 US dollars

High-end 1080 TI setups:

Intel Xeon 1270, 16GB RAM 128GB SSD and 1x Nvidia 1080 TI GPU $ 149
Intel Xeon E3-1270v1
16 GB ddr3 ECC memory
128GB SSD
1x Nvidia 1080 TI
$ 149

**** Looking for offers from LA DC? Send us an e-mail with your requirements and we will see what options we have for you! ****
Do you get a better deal on a setup like this or do you not see something you're looking for? Please contact SALES@WEBNX.COM. We have pretty much everything you can imagine. We offer special / discount prices and can often outperform many comparable providers.

High-end clusters of servers at a great price, all connected at 10 Gbps. Build something amazing with it!
800 / 1.600HT Core, 2.5 TB RAM 4.8 TB NVMe! 40x Intel e5-2680v2 server with 10 Gbps backend
40x dual-CPU Intel E5-2660v2 (each 20 / 40HT cores) – tremendous computing power!
64 GB RAM per server (upgrades in stock)
1 Gbps public port (300 TB outbound data exchange between all servers)
10 Gbps private link on all servers / your own private switch
SAN: E5-1620, 128GB of RAM, 24x 1TB Enterprise SSD Drives
Backup / Second SAN: e3-1270, 16 GB RAM, 12 x 4 TB SAS with Hardware RAID
Add a 1.2 TB enterprise NVMe to each server (48 TB of storage) and you'll receive another $ 600 per month
$ 7,000

Additional Clearance Servers can be found at https://webnx.com/dedicated-servers/clearance-servers/

Do not you like the indicated price? Make us an offer! We have been offering high-end configurations for more than a decade!

Since you are at WHT, you know that there are many other providers from which you can choose. Why should you choose WebNX? The things that characterize us are:

1. In our network, few providers have nearly as many Tier 1 providers in their network mix. We are not cheap and are looking for one or two budget providers. We also have a Noction Route Optimizer set to 100% in Performance mode, which constantly checks and moves routes to the best providers / fixes packet loss routes. We also welcome suggestions from customers and can customize the customer routes as needed.

2. Our hardware offers. Few vendors offer anything from what we have in store, from just about every type of CPU (not just one or two of the basic single and dual CPU offerings) to high-memory options, to crazy big hard drive offerings (more than 100 hard drives required)? No problem!) And unique network options from 100 Gbps, 40 Gbps, 2x 10 Gbps, to Infiniband offerings.

3. Our stability and employees. We have been with WHT for over 15 years and have 30 full-time employees. We are not a night flying company, kiddie host or reseller. We have direct leases with the building and own / operate everything. I urge you to review our reviews on WHT. You will find some who have been with us for more than 6 years.

To purchase one of these packages, please send an email to SALES@WEBNX.COM with the server you wish to purchase and we will set up a custom registration link for you.

The full cPanel costs $ 27 per month
cPanel VPS License (Xen / KVM) 12 USD per month
DirectAdmin ** FREE ** with any dedicated server that costs over $ 99

Windows licenses refer to the real core, not the HT core:
Windows 2008/2012/2016 STD – 4 USD per 2x cores (only real cores count)
Windows 2012/2016 Dc Ed – $ 26 per 2 cores (only real cores count)

Anything legal in the US and California is alright.

Including legal content for adults and proxy servers!

Not allowed except IRC.

Los Angeles Network: https://webnx.com/company/networks/l…ornia-network/
Premium Cisco-based network, base network based on six high-end Cisco ASR 9000 Noction BGP route optimizers

Level3 -1x 10gbps
XO – 1x 10 Gbps
Comcast – 10 Gbps
NTT – 2x 10 Gbps
Telia – 2x 10 Gbps
PCCW Global – 2×10 Gbps
Zayo – 2x 10 Gbps
GTT – 2×10 Gbps
China Unicom 1x 10g port
Any2 Peering Fabric – 10 Gbps
Equinix Peering – 2x 10 Gbps
Hurricane Electric – 2x 10 Gbps
Cogent (mainly peering / only for optimized routes) 1x 100gbps port

Pingtests to WebNX.com
1G test file – http://mirrors.webnx.com/1gb.bin
10g test file http://mirrors-lax.webnx.com/test/10gb.bin

You can also test us on speedtest.net – http://webnx.speedtest.net

If you have other requirements, please let us know as we strive for the best possible network.

The Ogden, Utah network consists of world-class Cisco ASR 9010 routers used by Noction IRP and the following route optimization providers:

10 GB – Level3 communication
10 GB – XO communication
10 GB – Telia
10 GB – Zayo (not available while we redirect the route)
10 GB – GTT
2x 100GB – Cogent
2x 10GB – HE.net / Hurricane electric
1 GB – CenturyLink
10GB (soon 3x) – Link back to our super connected Los Angeles network

Speed ​​tests:
10g test file http://mirrors-ogd.webnx.com/test/10gb.bin
Speedtest.net Server – http://zx4.speedtest.net

We will announce your IP for free!
If you have other needs, please let us know as we strive for the best possible network.

Visit our website for more information – https://WebNX.com/

How do I upgrade to Windows 10 1903 with users and operating system on different drives?

How do I upgrade to Windows 10 1903 with users and operating system on different drives?

I am currently on Windows 10 1803 and would like to update to 1903.

I have an Ausus FX503VD that has a 128GB M.2 SSD and 1TB HDD. I first installed Windows 10 on the SSD (C 🙂 and changed the path for programs and users to point to the hard drive (D :). I did this because I migrated from a single drive PC whose user directory was significantly larger than 128GB. So I was able to separate the operating system and other files and also use the SSD for a faster start while I was there.

I could easily upgrade to 1803, but now when I try to update to 1903, the following screen appears:

Enter image description here

The languages ​​are all the same: en-US.

It is obvious that this is due to this change, but I have been using this PC for a long time. If I change the user path back to the C: drive, some programs may be buggy and I do not know which one.

Incidentally, I have created symbolic links from C: to D: for the program directories. I could not do that for the user directory because installing Windows under C: created the default user folder there.

Is there a way to force the update without losing my settings and files instead of upgrading? And the moment I change the settings back, would I break access to the programs and users in D: due to incompatibility issues?

LSI MegaRaid 9261-8i Detects Drives as "Unconfigured Ware (Not Supported)"

I just bought 9 SAS drives to create my home storage. 8 drives work in Raid 6 and the 9th drive is a replacement drive. However, after purchasing the LSI MegaRaid 9261-8i and connecting only 6 drives for testing, the card recognizes the cards as "Unconfigured merchandise (not supported)". After digging on the internet I found a similar problem that the drive was formatted with sector size 520, and the solution is to format it with sector size 512B. However, I can not see the drives independently (directly) on Windows 10 or CentOs7.

MSM detects drives

I installed MegaRaid Storage Manager on Windows and it shows that the sector size is 512B. however, when the command is issued MegaCli64.exe -PDList -aALL.
it shows that the sector size is 0.
My LSI card
My HDD link

F:  Downloads  Compressed  8-07-14_MegaCLI  Windows> MegaCli64.exe -PDList -aALL

Adapter # 0

Chassis ID: 252
Slot number: 0
Housing position: N / A
Device ID: 52
WWN: 5000C500563289E4
Running number: 1
Media error count: 0
Other number of errors: 0
Predictive number of errors: 0
Last prediction error event sequence number: 0
PD type: SAS

Raw size: 3,462 TB [0x1bb5bea00 Sectors]
Not enforced Size: 3,462 TB [0x1bb4bea00 Sectors]
Forced size: 3.461 TB [0x1bb317000 Sectors]
Sector size: 0
Logical sector size: 0
Physical sector size: 0
Firmware status: Not configured (good), started up
Device firmware version: E06A
Shield counter: 0
Successful completion of the diagnosis on: N / A
SAS address (0): 0x5000c500563289e5
SAS address (1): 0x0
Number of connected port: 3 (path0)
Inquiry data: IBM-SSG S7CR4P0 E06AZ1Z0D1K5 02E06A
FDE-capable: capable
Enable FDE: Disable
Secured: Unsecured
Locked: unlocked
Requires EKM Attention: No
Foreign State: None
Device speed: 6.0 Gbps
Connection speed: 6.0 Gbps
Media Type: Hard Disk Device
Drive: Not supported
Drive temperature: N / A
PI authorization: no
Drive is formatted for PI information: No.
PI: No PI
Port 0:
Port Status: Active
Port's left-handed: 6.0Gb / s
Port 1:
Port Status: Active
Port's left-handed: 6.0Gb / s
Drive has reported a S.M.A.R.T alert: No.



Chassis ID: 252
Slot number: 1
Housing position: N / A
Device ID: 51
WWN: 5000C50055AAC5C0
Running number: 1
Media error count: 0
Other number of errors: 0
Predictive number of errors: 0
Last prediction error event sequence number: 0
PD type: SAS

Raw size: 3,462 TB [0x1bb5bea00 Sectors]
Not enforced Size: 3,462 TB [0x1bb4bea00 Sectors]
Forced size: 3.461 TB [0x1bb317000 Sectors]
Sector size: 0
Logical sector size: 0
Physical sector size: 0
Firmware status: Not configured (good), started up
Device firmware version: E06A
Shield counter: 0
Successful completion of the diagnosis on: N / A
SAS address (0): 0x5000c50055aac5c1
SAS address (1): 0x0
Connected port number: 2 (path0)
Request data: IBM-SSG S7CR4P0 E06AZ1Z055N9 02E06A
FDE-capable: capable
Enable FDE: Disable
Secured: Unsecured
Locked: unlocked
Requires EKM Attention: No
Foreign State: None
Device speed: 6.0 Gbps
Connection speed: 6.0 Gbps
Media Type: Hard Disk Device
Drive: Not supported
Drive temperature: N / A
PI authorization: no
Drive is formatted for PI information: No.
PI: No PI
Port 0:
Port Status: Active
Port's left-handed: 6.0Gb / s
Port 1:
Port Status: Active
Port's left-handed: 6.0Gb / s
Drive has reported a S.M.A.R.T alert: No.



Chassis ID: 252
Slot number: 2
Housing position: N / A
Device ID: 50
WWN: 5000C50056328B8C
Running number: 1
Media error count: 0
Other number of errors: 0
Predictive number of errors: 0
Last prediction error event sequence number: 0
PD type: SAS

Raw size: 3,462 TB [0x1bb5bea00 Sectors]
Not enforced Size: 3,462 TB [0x1bb4bea00 Sectors]
Forced size: 3.461 TB [0x1bb317000 Sectors]
Sector size: 0
Logical sector size: 0
Physical sector size: 0
Firmware status: Not configured (good), started up
Device firmware version: E06A
Shield counter: 0
Successful completion of the diagnosis on: N / A
SAS Address (0): 0x5000c50056328b8d
SAS address (1): 0x0
Number of connected port: 1 (path0)
Request data: IBM-SSG S7CR4P0 E06AZ1Z0D1JN 02E06A
FDE-capable: capable
Enable FDE: Disable
Secured: Unsecured
Locked: unlocked
Requires EKM Attention: No
Foreign State: None
Device speed: 6.0 Gbps
Connection speed: 6.0 Gbps
Media Type: Hard Disk Device
Drive: Not supported
Drive temperature: N / A
PI authorization: no
Drive is formatted for PI information: No.
PI: No PI
Port 0:
Port Status: Active
Port's left-handed: 6.0Gb / s
Port 1:
Port Status: Active
Port's left-handed: 6.0Gb / s
Drive has reported a S.M.A.R.T alert: No.



Chassis ID: 252
Slot number: 3
Housing position: N / A
Device ID: 53
WWN: 5000C500562714A0
Running number: 1
Media error count: 0
Other number of errors: 0
Predictive number of errors: 0
Last prediction error event sequence number: 0
PD type: SAS

Raw size: 3,462 TB [0x1bb5bea00 Sectors]
Not enforced Size: 3,462 TB [0x1bb4bea00 Sectors]
Forced size: 3.461 TB [0x1bb317000 Sectors]
Sector size: 0
Logical sector size: 0
Physical sector size: 0
Firmware status: Not configured (good), started up
Device firmware version: E06A
Shield counter: 0
Successful completion of the diagnosis on: N / A
SAS address (0): 0x5000c500562714a1
SAS address (1): 0x0
Connected port number: 0 (path0)
Inquiry data: IBM-SSG S7CR4P0 E06AZ1Z0CDBW 02E06A
FDE-capable: capable
Enable FDE: Disable
Secured: Unsecured
Locked: unlocked
Requires EKM Attention: No
Foreign State: None
Device speed: 6.0 Gbps
Connection speed: 6.0 Gbps
Media Type: Hard Disk Device
Drive: Not supported
Drive temperature: N / A
PI authorization: no
Drive is formatted for PI information: No.
PI: No PI
Port 0:
Port Status: Active
Port's left-handed: 6.0Gb / s
Port 1:
Port Status: Active
Port's left-handed: 6.0Gb / s
Drive has reported a S.M.A.R.T alert: No.



Chassis ID: 252
Slot number: 4
Housing position: N / A
Device ID: 55
WWN: 5000C50056328EB8
Running number: 1
Media error count: 0
Other number of errors: 0
Predictive number of errors: 0
Last prediction error event sequence number: 0
PD type: SAS

Raw size: 3,462 TB [0x1bb5bea00 Sectors]
Not enforced Size: 3,462 TB [0x1bb4bea00 Sectors]
Forced size: 3.461 TB [0x1bb317000 Sectors]
Sector size: 0
Logical sector size: 0
Physical sector size: 0
Firmware status: Not configured (good), started up
Device firmware version: E06D
Shield counter: 0
Successful completion of the diagnosis on: N / A
SAS address (0): 0x5000c50056328eb9
SAS address (1): 0x0
Number of connected port: 5 (path0)
Query data: IBM-SSG S7CR4P0 E06DZ1Z0DALL 07E06D
FDE-capable: capable
Enable FDE: Disable
Secured: Unsecured
Locked: unlocked
Requires EKM Attention: No
Foreign State: None
Device speed: 6.0 Gbps
Connection speed: 6.0 Gbps
Media Type: Hard Disk Device
Drive: Not supported
Drive temperature: N / A
PI authorization: no
Drive is formatted for PI information: No.
PI: No PI
Port 0:
Port Status: Active
Port's left-handed: 6.0Gb / s
Port 1:
Port Status: Active
Port's left-handed: 6.0Gb / s
Drive has reported a S.M.A.R.T alert: No.



Chassis ID: 252
Slot number: 5
Housing position: N / A
Device ID: 54
WWN: 5000C50055B43CE0
Running number: 1
Media error count: 0
Other number of errors: 0
Predictive number of errors: 0
Last prediction error event sequence number: 0
PD type: SAS

Raw size: 3,462 TB [0x1bb5bea00 Sectors]
Not enforced Size: 3,462 TB [0x1bb4bea00 Sectors]
Forced size: 3.461 TB [0x1bb317000 Sectors]
Sector size: 0
Logical sector size: 0
Physical sector size: 0
Firmware status: Not configured (good), started up
Device firmware version: E06A
Shield counter: 0
Successful completion of the diagnosis on: N / A
SAS address (0): 0x5000c50055b43ce1
SAS address (1): 0x0
Number of connected port: 4 (path0)
Inquiry data: IBM-SSG S7CR4P0 E06AZ1Z05N22 02E06A
FDE-capable: capable
Enable FDE: Disable
Secured: Unsecured
Locked: unlocked
Requires EKM Attention: No
Foreign State: None
Device speed: 6.0 Gbps
Connection speed: 6.0 Gbps
Media Type: Hard Disk Device
Drive: Not supported
Drive temperature: N / A
PI authorization: no
Drive is formatted for PI information: No.
PI: No PI
Port 0:
Port Status: Active
Port's left-handed: 6.0Gb / s
Port 1:
Port Status: Active
Port's left-handed: 6.0Gb / s
Drive has reported a S.M.A.R.T alert: No.




Output code: 0x00

F:  Downloads  Compressed  8-07-14_MegaCLI  Windows>

please help

macos – Paragon NTFS for Western Digital External Drives (WD) can not be found

It looks like there are two possibilities. The first is to use the paid software from Paragon Software. Although it is not free, it seems to be the most compatible option for the future.

Western Digital also has a link to an older version of NTFS for Mac. Note that the new NTFS for Mac seems to be compatible with macOS 10.14, with the WD software listing compatibility until 10.12.

Paragon Software's Frequently Asked Questions (FAQs) state that you may be eligible to upgrade from WD or Segate's older versions of NTFS for Mac.

I have a Seagate or Western Digital device with preinstalled
NTFS for Mac. How can I get my update?

You are entitled to a special update for your current version of
Microsoft NTFS for Mac from Paragon Software. Please contact our support
Contact support@paragon-software.com to recover your update.

Source: NTFS for Mac FAQ