nikon d5600 – Remove the latitude and longitude screen when viewing a photo

Nikon D5600. I must have changed a setting and do not know how to hide the Latitude and Longitude screen when viewing photos. I.E. Black screen with "latitude and longitude" that I don't want, overlaying photo.

I am new to this camera and am trying to learn how to get the right settings for normal telephoto. I want to use manual mode, not automatic mode.

What would cause this screen to appear after taking photos? ( Just happened today when I tried to change settings, some of which I don't understand )

How do I change this setting again to display normal photos?

Dell Latitude – The battery drops from 46% to 0, although the design and full charge capacity are the same

I bought a used Dell Latitude E7450 yesterday. The laptop works perfectly, except that the battery drops very quickly from 46% to 0% and switches off without warning. The battery report states that both the design capacity and the full charging capacity are 38,850 mWh, which does not appear to make sense. I will attach the battery report to the Post if additional information is required.

battery wear

Current conditions in the last 3 days

How do I draw a latitude and longitude via Google Maps?

There is a website named This feature offered the ability to draw latitudes and longitudes via Google Maps (you tap on a point on maps, longitude and latitude are drawn automatically). This feature helps a lot, as I sometimes have to know which places fall in the same latitude or longitude.

The services of the website are not available and may not continue. How do I draw latitudes and longitudes via Google Maps or another map?

boot – Dell Latitude false "Invalid partition format!" error

I have a Dell Latitude that I've been playing around for a while and that has several operating systems (Windows and Ubuntu versions), including multiboot options. When I installed an operating system – I can not remember which one – I got one Partition format invalid! Error on every startup. It's not a real problem: when I meet Enter it boots without problems. However, it is problematic: Is there a way to fix it?

I can risk losing data in my drive – I'll reinstall Ubuntu anyway – so any solution would be fine.

Save the latitude and longitude of Laravel

The guy decimal is shown as string, If you need the values ​​in their numeric form, just do that occupation for this type:

protected $casts = [
    'latitude' => 'float',
    'longitude' => 'float',

Remember that in this way you have the rounding problems that naturally occur float has due to the number of memory restrictions. With latitude and longitude this does not bother so much – to the point where it does not even have to be decimal the type of column.

You can do that occupation to real. float or double,

Google Maps – Latitude and Longitude Geofence Sets for Large Cities?

I have an array of Lat / Long Coords:

const londonGeofence = ( 

Then I test with certain values ​​(latitude and longitude) that I get from a form, whether they are in a particular area.

Do you have any idea where I can find similar lat / long sets for other cities?

I need the coordinates for big European cities, and manual drawing is a torture, not to mention the work I'm going to do is not really accurate.

Graphene – Latitude: difference between generation and extent

Romanian map

This is about finding a way from A (rad) to B (ucharest). I'll use the city initials in the picture instead of their full names.

Some basic rules: We move in alphabetical order. The crossing must be stopped as soon as the destination node has been generated and no longer extended. In this last part, I feel that I do not quite understand what is being asked.

So the solution is: Arad, Sibiu, Timisoara, Zerind, Fagaras, Bucharest.

What I think is the solution as follows: We are at A, so A was "generated". And then we expand A and give ourselves: A, S, T, Z. Since the target node has not yet been generated, we start with S. If we expand S, we give F and R (not yet a target node) and then we expand T and give us L, after which Z is extended and gives us O.
So far we have A, S, T, Z, F, R, L, O. Now we go alphabetically to F for the extension. This gives us B and here the traversing should stop.

So my solution is A, S, T, Z, F, R, L, O, B.

Can you tell me where I am wrong and why the given solution (as opposed to my solution) is correct?

Geography – Find the nearest total solar eclipse over a given latitude and longitude?

What is a reasonable way to code the title question in Mathematica? The following tried to give polygons over GeoPositions over lists of pairs, but only digging into these seemed inelegant. Besides, there may be a more general way than I suspected below.

Is there a better way to look for eclipses in a given time than I dared to do? Many thanks.

solar eclipse[{DateObject[{2010, 1, 1, 0, 0}].
Date Object[{2030, 1, 1, 0, 0}], All}, "TotalPhasePolygon",
EclipseType -> "Total"]