blockchain – how to Recover Bitcoin lost to Investment scam

There are Lots Of Scammers Out there Scamming people with little knowledge about Bitcoin Mining or Bitcoin in General. taking advantage of their interest in Investing in Bitcoin. Well Any one who as Ever Fallen Victim can now Recover their Funds By ËMÄÏĻÏÑĞ [scrubbed scam email address]. he is a Professional Recovery Expert Who successfully Recovered 85K USD Worth Of BTC Stolen from My Wallet by Hackers and also Helped A Close Friend Recover 9.67 BTC She Lost to Fake Bitcoin Mining Website. As a Guaranty That he will Get the Job Done, He Takes Charges Only After The Job Is Done.

transactions – Need help to recover sent Litecoin (LTE) from Bitstamp to a BTC address in Coinbase

I have foolishly entered a BTC address into my LTC destination address last night when withdrawing funds from Bitstamp to Coinbase. At first an error message appeared saying:

“Unable to withdraw to multisig address. We have automatically converted your multisig address. Please copy and paste the converted address in the input field if you wish to make a withdrawal. Please make sure that you are able to make a withdrawal to this address.”

The destination address then went from the BTC one that I had copied and pasted in error, which started with a ‘3’ to an address that started with an ‘M’.

The transaction went through as expected, I was asked to confirm it via email and that was it. Little did I realise that I had entered the wrong destination address. I didnt even think it would have been accepted if there was such a glaring error…..

When I checked my Coinbase wallet today expecting the funds to be in there, I realised something had gone seriously wrong. I checked the transaction in Bitstamp and it has been marked as “FINISHED”. Yet there is NOTHING showing in my Coinbase wallets.

I called Bitstamp when I realised what had happened and they told me I had to get in touch with Coinbase. I created a support ticket this evening but Coinbase replied and said there was incorrect info in my request (there wasnt). I resubmitted it and again, my ticket was rejected for exactly the same reason. I have since sent an email to their general support email address asking for help but judging by their Reddit page they dont appear to be very forthcoming in responding to queries.

I have Googled things all evening and seem to have found this article which suggests it may be possible to retrieve the coins:

How To Recover Litecoin Sent To A Bitcoin Address

I have tried to work it out myself but I have absolutely no idea what I am doing. Some of the comments Ive read on here and other forums suggest its simple to do. I would really appreciate it if anyone can help me recover these funds. They cant have just disappeared into thin air. I sent them from myself to myself, theres no 3rd parties involved. And I desperately need them back to enable me to pay bills I’ve got coming out next week.

internal storage – How to recover from encryption problem?

I encrypted my phone with a lockscreen, and accidentally messed up the system and TWRP. I’ve since formatted it anyway and I’m using it normally, this time of course without root anymore lol. But, I took a backup of the data before that in case there is a chance. Can I decrypt it somehow if I still remember the lockscreen? Since I’ve already formatted the phone to a new system I can’t grab encryption keys from there anymore, but can I just input it from another software that can read the files? I read about this online and there’s a bunch of weird commands apparently you need to type into the system and I’m not too familiar with this as I don’t want to mess up anything, and it’s really quite complicated stuff to understand. What I got from this was you would format the phone again in order to recover the filesystem stuff, which obviously I can’t do. So what’s the solution here?

ANNOUNCEMENT – Help Proxies-free Recover 5000 USDT (TETHER.to) | Proxies-free

Hi BMFers,

Just don’t ask… I’m stoopid… It happens to everyone. ?

Long story short I managed to lose the Blockchain wallet secret phrase and on the blockchain wallet, there was about $5000 worth of USDT at that time. (funds put aside for company bad days).

I waited for a reply from Blockchain.com support and they did answer on Twitter and unfortunately, they cannot help me because they don’t have “forgot blockchain password” feature.

The last chance to recover the funds would be with the help of Tether.to team that can recover significant funds of USDT as you can see here. And read somewhere the amount must be greater than $1000 and it is. These funds would be enough to cover company basic expenses for 2-3 months.

Please comment/Tweet/ReTweet this post

Hope to catch attention from Tether team and help us out, the original USDT sender also said he will help me out verify ownership of the address.

Regards,
BMF Team

Recover data from old LVM partition on Centos 7

a few days back I my system would not boot up and go directly to emergency mode with no luck getting out, so I decided to reinstall centos 7. However, there are a few files that I would like to recover from my old home director which still have an inactive partition on one of the drives. This system is a server with RAID 10. Is there any way of recover this data? I had attempted to run vgchange -ay –activation partial on the inactive VG group before, however, when I reboot the system it goes directly to dracut and says that ‘/dev/centos00/root does not exist’ and does not boot, so I had to reinstall the OS once again after failing to debug the issue.

(root@DESKTOP-3D5QPCJ /)# lsblk
NAME                MAJ:MIN RM  SIZE RO TYPE   MOUNTPOINT
sda                   8:0    0  3.5T  0 disk   
├─sda1                8:1    0  200M  0 part   
├─sda2                8:2    0    1G  0 part   
├─sda3                8:3    0  3.3T  0 part   
└─md126               9:126  0  3.3T  0 raid1  
  ├─md126p1         259:0    0  200M  0 md     /boot/efi
  ├─md126p2         259:1    0    1G  0 md     /boot
  └─md126p3         259:2    0  3.3T  0 md     
    ├─centos00-root 253:0    0   50G  0 lvm    /
    ├─centos00-swap 253:1    0    4G  0 lvm    (SWAP)
    └─centos00-home 253:2    0  3.3T  0 lvm    /home
sdb                   8:16   0  3.5T  0 disk   
└─md126               9:126  0  3.3T  0 raid1  
  ├─md126p1         259:0    0  200M  0 md     /boot/efi
  ├─md126p2         259:1    0    1G  0 md     /boot
  └─md126p3         259:2    0  3.3T  0 md     
    ├─centos00-root 253:0    0   50G  0 lvm    /
    ├─centos00-swap 253:1    0    4G  0 lvm    (SWAP)
    └─centos00-home 253:2    0  3.3T  0 lvm    /home
sdc                   8:32   0  3.5T  0 disk   
└─md124               9:124  0  6.7T  0 raid10 
  └─md124p1         259:3    0  6.7T  0 md     
sdd                   8:48   0  3.5T  0 disk   
└─md124               9:124  0  6.7T  0 raid10 
  └─md124p1         259:3    0  6.7T  0 md     
sde                   8:64   0  3.5T  0 disk   
└─md124               9:124  0  6.7T  0 raid10 
  └─md124p1         259:3    0  6.7T  0 md     
sdf                   8:80   0  3.5T  0 disk   
└─md124               9:124  0  6.7T  0 raid10 
  └─md124p1         259:3    0  6.7T  0 md     
sdg                   8:96   1 29.3G  0 disk   
├─sdg1                8:97   1  4.4G  0 part   /run/media/biosero/CentOS 7 x86_64
└─sdg2                8:98   1  8.6M  0 part   
(root@DESKTOP-3D5QPCJ /)# cat /proc/mdstat
Personalities : (raid1) (raid10) 
md124 : active (auto-read-only) raid10 sdc(3) sdd(2) sde(1) sdf(0)
      7126392832 blocks super external:/md125/0 64K chunks 2 near-copies (4/4) (UUUU)
      
md125 : inactive sdd(3)(S) sdf(2)(S) sdc(1)(S) sde(0)(S)
      20804 blocks super external:imsm
       
md126 : active raid1 sda(1) sdb(0)
      3563196416 blocks super external:/md127/0 (2/2) (UU)
      
md127 : inactive sda(1)(S) sdb(0)(S)
      10402 blocks super external:imsm
       
unused devices: <none>

Running: lvscan and lvmdiskscan

(root@DESKTOP-3D5QPCJ ~)# lvscan
  WARNING: Device for PV uFlcEe-aeFd-NLbh-BGgN-cnNP-XTpo-BBjs28 not found or rejected by a filter.
  Couldn't find device with uuid uFlcEe-aeFd-NLbh-BGgN-cnNP-XTpo-BBjs28.
  inactive          '/dev/centos/home' (150.00 GiB) inherit
  ACTIVE            '/dev/centos00/swap' (4.00 GiB) inherit
  ACTIVE            '/dev/centos00/home' (3.26 TiB) inherit
  ACTIVE            '/dev/centos00/root' (50.00 GiB) inherit

I also /dev/centos does not seem to exist, however as shown above, lvscan recognizes it.

(root@DESKTOP-3D5QPCJ ~)# lvmdiskscan 
  /dev/md126p1 (     200.00 MiB) 
  /dev/md126p2 (       1.00 GiB) 
  /dev/md126p3 (      <3.32 TiB) LVM physical volume
  /dev/md124p1 (      <6.64 TiB) LVM physical volume
  /dev/sde     (       3.49 TiB) 
  /dev/sdf     (       3.49 TiB) 
  /dev/sdg1    (      <4.39 GiB) 
  /dev/sdg2    (       8.59 MiB) 
  2 disks
  4 partitions
  0 LVM physical volume whole disks
  2 LVM physical volumes
(root@DESKTOP-3D5QPCJ /)# pvscan
  Couldn't find device with uuid uFlcEe-aeFd-NLbh-BGgN-cnNP-XTpo-BBjs28.
  WARNING: found device with duplicate /dev/sda3
  WARNING: Disabling lvmetad cache which does not support duplicate PVs.
  WARNING: Scan found duplicate PVs.
  WARNING: Not using lvmetad because cache update failed.
  WARNING: Not using device /dev/sda3 for PV RbI6tp-pVf8-y32z-3aGJ-N0a9-GiCW-GlwrfA.
  WARNING: PV RbI6tp-pVf8-y32z-3aGJ-N0a9-GiCW-GlwrfA prefers device /dev/md126p3 because device is used by LV.
  PV (unknown)      VG centos          lvm2 (<3.32 TiB / 3.17 TiB free)
  PV /dev/md124p1   VG centos          lvm2 (<6.64 TiB / <6.64 TiB free)
  PV /dev/md126p3   VG centos00        lvm2 (<3.32 TiB / 0    free)
  Total: 3 (13.27 TiB) / in use: 3 (13.27 TiB) / in no VG: 0 (0   )
(root@DESKTOP-3D5QPCJ /)# vgscan
  Couldn't find device with uuid uFlcEe-aeFd-NLbh-BGgN-cnNP-XTpo-BBjs28.
  WARNING: found device with duplicate /dev/sda3
  WARNING: Disabling lvmetad cache which does not support duplicate PVs.
  WARNING: Scan found duplicate PVs.
  WARNING: Not using lvmetad because cache update failed.
  Reading all physical volumes.  This may take a while...
  WARNING: Not using device /dev/sda3 for PV RbI6tp-pVf8-y32z-3aGJ-N0a9-GiCW-GlwrfA.
  WARNING: PV RbI6tp-pVf8-y32z-3aGJ-N0a9-GiCW-GlwrfA prefers device /dev/md126p3 because of previous preference.
  Found volume group "centos" using metadata type lvm2
  Found volume group "centos00" using metadata type lvm2
(root@DESKTOP-3D5QPCJ /)# vgs -a -o +devices -P
  PARTIAL MODE. Incomplete logical volumes will be processed.
  WARNING: Not using lvmetad because duplicate PVs were found.
  WARNING: Use multipath or vgimportclone to resolve duplicate PVs?
  WARNING: After duplicates are resolved, run "pvscan --cache" to enable lvmetad.
  WARNING: Not using device /dev/sda3 for PV RbI6tp-pVf8-y32z-3aGJ-N0a9-GiCW-GlwrfA.
  WARNING: PV RbI6tp-pVf8-y32z-3aGJ-N0a9-GiCW-GlwrfA prefers device /dev/md126p3 because device is used by LV.
  Couldn't find device with uuid uFlcEe-aeFd-NLbh-BGgN-cnNP-XTpo-BBjs28.
  VG       #PV #LV #SN Attr   VSize  VFree  Devices             
  centos     2   1   0 wz-pn-  9.95t <9.81t (unknown)(830240)   
  centos00   1   3   0 wz--n- <3.32t     0  /dev/md126p3(0)     
  centos00   1   3   0 wz--n- <3.32t     0  /dev/md126p3(1024)  
  centos00   1   3   0 wz--n- <3.32t     0  /dev/md126p3(856814)
(root@DESKTOP-3D5QPCJ /)# lvs -P -a -o +devices
  PARTIAL MODE. Incomplete logical volumes will be processed.
  WARNING: Not using lvmetad because duplicate PVs were found.
  WARNING: Use multipath or vgimportclone to resolve duplicate PVs?
  WARNING: After duplicates are resolved, run "pvscan --cache" to enable lvmetad.
  WARNING: Not using device /dev/sda3 for PV RbI6tp-pVf8-y32z-3aGJ-N0a9-GiCW-GlwrfA.
  WARNING: PV RbI6tp-pVf8-y32z-3aGJ-N0a9-GiCW-GlwrfA prefers device /dev/md126p3 because device is used by LV.
  Couldn't find device with uuid uFlcEe-aeFd-NLbh-BGgN-cnNP-XTpo-BBjs28.
  LV   VG       Attr       LSize   Pool Origin Data%  Meta%  Move Log Cpy%Sync Convert Devices             
  home centos   -wi-----p- 150.00g                                                     (unknown)(830240)   
  home centos00 -wi-ao----   3.26t                                                     /dev/md126p3(1024)  
  root centos00 -wi-ao----  50.00g                                                     /dev/md126p3(856814)
  swap centos00 -wi-ao----   4.00g                                                     /dev/md126p3(0) 

In /etc/lvm/archive I have a file centos_00000-1647888590.vg with the following content

(root@DESKTOP-3D5QPCJ archive)# cat centos_00000-1647888590.vg 
# Generated by LVM2 version 2.02.187(2)-RHEL7 (2020-03-24): Mon May  3 17:46:13 2021

contents = "Text Format Volume Group"
version = 1

description = "Created *before* executing 'vgscan'"

creation_host = "DESKTOP-3D5QPCJ.localdomain"   # Linux DESKTOP-3D5QPCJ.localdomain 3.10.0-1160.el7.x86_64 #1 SMP Mon Oct 19 16:18:59 UTC 2020 x86_64
creation_time = 1620078373  # Mon May  3 17:46:13 2021

centos {
    id = "oBLx8X-BuMf-m5ga-8cPm-A7EF-KKqH-Tm8Ef7"
    seqno = 6
    format = "lvm2"         # informational
    status = ("RESIZEABLE", "READ", "WRITE")
    flags = ()
    extent_size = 8192      # 4 Megabytes
    max_lv = 0
    max_pv = 0
    metadata_copies = 0

    physical_volumes {

        pv0 {
            id = "uFlcEe-aeFd-NLbh-BGgN-cnNP-XTpo-BBjs28"
            device = "(unknown)"    # Hint only

            status = ("ALLOCATABLE")
            flags = ("MISSING")
            dev_size = 7124289536   # 3.31751 Terabytes
            pe_start = 2048
            pe_count = 869664   # 3.3175 Terabytes
        }

        pv1 {
            id = "KWgy30-A4wC-Cciu-wxe1-8QDg-fy8s-Jy16z2"
            device = "/dev/md124p1" # Hint only

            status = ("ALLOCATABLE")
            flags = ()
            dev_size = 14252781568  # 6.63697 Terabytes
            pe_start = 2048
            pe_count = 1739841  # 6.63697 Terabytes
        }
    }

    logical_volumes {

        home {
            id = "fCNIEf-wal2-Xejs-M3nc-dnXR-HB0Q-yIXoVi"
            status = ("READ", "WRITE", "VISIBLE")
            flags = ()
            creation_time = 1586910049  # 2020-04-14 20:20:49 -0400
            creation_host = "localhost"
            segment_count = 1

            segment1 {
                start_extent = 0
                extent_count = 38400    # 150 Gigabytes

                type = "striped"
                stripe_count = 1    # linear

                stripes = (
                    "pv0", 830240
                )
            }
        }
    }

}
   

Thank you in advanced for anyone willing to give some input on this issue.

partitioning – Recover data from old LVM partition on Centos 7

a few days back I my system would not boot up and go directly to emergency mode with no luck getting out, so I decided to reinstall centos 7. However, there are a few files that I would like to recover from my old home director which still have an inactive partition on one of the drives. This system is a server with RAID 10. Is there any way of recover this data? I had attempted to run vgchange -ay –activation partial on the inactive VG group before, however, when I reboot the system it goes directly to dracut and says that ‘/dev/centos00/root does not exist’ and does not boot, so I had to reinstall the OS once again after failing to debug the issue.

(root@DESKTOP-3D5QPCJ /)# lsblk
NAME                MAJ:MIN RM  SIZE RO TYPE   MOUNTPOINT
sda                   8:0    0  3.5T  0 disk   
├─sda1                8:1    0  200M  0 part   
├─sda2                8:2    0    1G  0 part   
├─sda3                8:3    0  3.3T  0 part   
└─md126               9:126  0  3.3T  0 raid1  
  ├─md126p1         259:0    0  200M  0 md     /boot/efi
  ├─md126p2         259:1    0    1G  0 md     /boot
  └─md126p3         259:2    0  3.3T  0 md     
    ├─centos00-root 253:0    0   50G  0 lvm    /
    ├─centos00-swap 253:1    0    4G  0 lvm    (SWAP)
    └─centos00-home 253:2    0  3.3T  0 lvm    /home
sdb                   8:16   0  3.5T  0 disk   
└─md126               9:126  0  3.3T  0 raid1  
  ├─md126p1         259:0    0  200M  0 md     /boot/efi
  ├─md126p2         259:1    0    1G  0 md     /boot
  └─md126p3         259:2    0  3.3T  0 md     
    ├─centos00-root 253:0    0   50G  0 lvm    /
    ├─centos00-swap 253:1    0    4G  0 lvm    (SWAP)
    └─centos00-home 253:2    0  3.3T  0 lvm    /home
sdc                   8:32   0  3.5T  0 disk   
└─md124               9:124  0  6.7T  0 raid10 
  └─md124p1         259:3    0  6.7T  0 md     
sdd                   8:48   0  3.5T  0 disk   
└─md124               9:124  0  6.7T  0 raid10 
  └─md124p1         259:3    0  6.7T  0 md     
sde                   8:64   0  3.5T  0 disk   
└─md124               9:124  0  6.7T  0 raid10 
  └─md124p1         259:3    0  6.7T  0 md     
sdf                   8:80   0  3.5T  0 disk   
└─md124               9:124  0  6.7T  0 raid10 
  └─md124p1         259:3    0  6.7T  0 md     
sdg                   8:96   1 29.3G  0 disk   
├─sdg1                8:97   1  4.4G  0 part   /run/media/biosero/CentOS 7 x86_64
└─sdg2                8:98   1  8.6M  0 part   
(root@DESKTOP-3D5QPCJ /)# cat /proc/mdstat
Personalities : (raid1) (raid10) 
md124 : active (auto-read-only) raid10 sdc(3) sdd(2) sde(1) sdf(0)
      7126392832 blocks super external:/md125/0 64K chunks 2 near-copies (4/4) (UUUU)
      
md125 : inactive sdd(3)(S) sdf(2)(S) sdc(1)(S) sde(0)(S)
      20804 blocks super external:imsm
       
md126 : active raid1 sda(1) sdb(0)
      3563196416 blocks super external:/md127/0 (2/2) (UU)
      
md127 : inactive sda(1)(S) sdb(0)(S)
      10402 blocks super external:imsm
       
unused devices: <none>

Running: lvscan and lvmdiskscan

(root@DESKTOP-3D5QPCJ ~)# lvscan
  WARNING: Device for PV uFlcEe-aeFd-NLbh-BGgN-cnNP-XTpo-BBjs28 not found or rejected by a filter.
  Couldn't find device with uuid uFlcEe-aeFd-NLbh-BGgN-cnNP-XTpo-BBjs28.
  inactive          '/dev/centos/home' (150.00 GiB) inherit
  ACTIVE            '/dev/centos00/swap' (4.00 GiB) inherit
  ACTIVE            '/dev/centos00/home' (3.26 TiB) inherit
  ACTIVE            '/dev/centos00/root' (50.00 GiB) inherit

I also /dev/centos does not seem to exist, however as shown above, lvscan recognizes it.

(root@DESKTOP-3D5QPCJ ~)# lvmdiskscan 
  /dev/md126p1 (     200.00 MiB) 
  /dev/md126p2 (       1.00 GiB) 
  /dev/md126p3 (      <3.32 TiB) LVM physical volume
  /dev/md124p1 (      <6.64 TiB) LVM physical volume
  /dev/sde     (       3.49 TiB) 
  /dev/sdf     (       3.49 TiB) 
  /dev/sdg1    (      <4.39 GiB) 
  /dev/sdg2    (       8.59 MiB) 
  2 disks
  4 partitions
  0 LVM physical volume whole disks
  2 LVM physical volumes
(root@DESKTOP-3D5QPCJ /)# pvscan
  Couldn't find device with uuid uFlcEe-aeFd-NLbh-BGgN-cnNP-XTpo-BBjs28.
  WARNING: found device with duplicate /dev/sda3
  WARNING: Disabling lvmetad cache which does not support duplicate PVs.
  WARNING: Scan found duplicate PVs.
  WARNING: Not using lvmetad because cache update failed.
  WARNING: Not using device /dev/sda3 for PV RbI6tp-pVf8-y32z-3aGJ-N0a9-GiCW-GlwrfA.
  WARNING: PV RbI6tp-pVf8-y32z-3aGJ-N0a9-GiCW-GlwrfA prefers device /dev/md126p3 because device is used by LV.
  PV (unknown)      VG centos          lvm2 (<3.32 TiB / 3.17 TiB free)
  PV /dev/md124p1   VG centos          lvm2 (<6.64 TiB / <6.64 TiB free)
  PV /dev/md126p3   VG centos00        lvm2 (<3.32 TiB / 0    free)
  Total: 3 (13.27 TiB) / in use: 3 (13.27 TiB) / in no VG: 0 (0   )
(root@DESKTOP-3D5QPCJ /)# vgscan
  Couldn't find device with uuid uFlcEe-aeFd-NLbh-BGgN-cnNP-XTpo-BBjs28.
  WARNING: found device with duplicate /dev/sda3
  WARNING: Disabling lvmetad cache which does not support duplicate PVs.
  WARNING: Scan found duplicate PVs.
  WARNING: Not using lvmetad because cache update failed.
  Reading all physical volumes.  This may take a while...
  WARNING: Not using device /dev/sda3 for PV RbI6tp-pVf8-y32z-3aGJ-N0a9-GiCW-GlwrfA.
  WARNING: PV RbI6tp-pVf8-y32z-3aGJ-N0a9-GiCW-GlwrfA prefers device /dev/md126p3 because of previous preference.
  Found volume group "centos" using metadata type lvm2
  Found volume group "centos00" using metadata type lvm2
(root@DESKTOP-3D5QPCJ /)# vgs -a -o +devices -P
  PARTIAL MODE. Incomplete logical volumes will be processed.
  WARNING: Not using lvmetad because duplicate PVs were found.
  WARNING: Use multipath or vgimportclone to resolve duplicate PVs?
  WARNING: After duplicates are resolved, run "pvscan --cache" to enable lvmetad.
  WARNING: Not using device /dev/sda3 for PV RbI6tp-pVf8-y32z-3aGJ-N0a9-GiCW-GlwrfA.
  WARNING: PV RbI6tp-pVf8-y32z-3aGJ-N0a9-GiCW-GlwrfA prefers device /dev/md126p3 because device is used by LV.
  Couldn't find device with uuid uFlcEe-aeFd-NLbh-BGgN-cnNP-XTpo-BBjs28.
  VG       #PV #LV #SN Attr   VSize  VFree  Devices             
  centos     2   1   0 wz-pn-  9.95t <9.81t (unknown)(830240)   
  centos00   1   3   0 wz--n- <3.32t     0  /dev/md126p3(0)     
  centos00   1   3   0 wz--n- <3.32t     0  /dev/md126p3(1024)  
  centos00   1   3   0 wz--n- <3.32t     0  /dev/md126p3(856814)
(root@DESKTOP-3D5QPCJ /)# lvs -P -a -o +devices
  PARTIAL MODE. Incomplete logical volumes will be processed.
  WARNING: Not using lvmetad because duplicate PVs were found.
  WARNING: Use multipath or vgimportclone to resolve duplicate PVs?
  WARNING: After duplicates are resolved, run "pvscan --cache" to enable lvmetad.
  WARNING: Not using device /dev/sda3 for PV RbI6tp-pVf8-y32z-3aGJ-N0a9-GiCW-GlwrfA.
  WARNING: PV RbI6tp-pVf8-y32z-3aGJ-N0a9-GiCW-GlwrfA prefers device /dev/md126p3 because device is used by LV.
  Couldn't find device with uuid uFlcEe-aeFd-NLbh-BGgN-cnNP-XTpo-BBjs28.
  LV   VG       Attr       LSize   Pool Origin Data%  Meta%  Move Log Cpy%Sync Convert Devices             
  home centos   -wi-----p- 150.00g                                                     (unknown)(830240)   
  home centos00 -wi-ao----   3.26t                                                     /dev/md126p3(1024)  
  root centos00 -wi-ao----  50.00g                                                     /dev/md126p3(856814)
  swap centos00 -wi-ao----   4.00g                                                     /dev/md126p3(0) 

When running fdisk -l

(root@DESKTOP-3D5QPCJ ~)# fdisk -l
WARNING: fdisk GPT support is currently new, and therefore in an experimental phase. Use at your own discretion.

Disk /dev/sda: 3840.8 GB, 3840755982336 bytes, 7501476528 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk label type: gpt
Disk identifier: A79FAFAB-C385-47A9-91DE-8DAE3638D3B6


#         Start          End    Size  Type            Name
 1         2048       411647    200M  EFI System      EFI System Partition
 2       411648      2508799      1G  Microsoft basic 
 3      2508800   7126390783    3.3T  Linux LVM       
WARNING: fdisk GPT support is currently new, and therefore in an experimental phase. Use at your own discretion.

Disk /dev/sdb: 3840.8 GB, 3840755982336 bytes, 7501476528 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk label type: gpt
Disk identifier: A79FAFAB-C385-47A9-91DE-8DAE3638D3B6


#         Start          End    Size  Type            Name
 1         2048       411647    200M  EFI System      EFI System Partition
 2       411648      2508799      1G  Microsoft basic 
 3      2508800   7126390783    3.3T  Linux LVM       

Disk /dev/sdc: 3840.8 GB, 3840755982336 bytes, 7501476528 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk label type: dos
Disk identifier: 0x00000000

   Device Boot      Start         End      Blocks   Id  System
/dev/sdc1   *           1  4294967295  2147483647+  ee  GPT
Partition 1 does not start on physical sector boundary.

Disk /dev/sdd: 3840.8 GB, 3840755982336 bytes, 7501476528 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk label type: dos
Disk identifier: 0x00000000

   Device Boot      Start         End      Blocks   Id  System
/dev/sdd1   *           1  4294967295  2147483647+  ee  GPT
Partition 1 does not start on physical sector boundary.

Disk /dev/sde: 3840.8 GB, 3840755982336 bytes, 7501476528 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/sdf: 3840.8 GB, 3840755982336 bytes, 7501476528 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes

WARNING: fdisk GPT support is currently new, and therefore in an experimental phase. Use at your own discretion.

Disk /dev/md126: 3648.7 GB, 3648713129984 bytes, 7126392832 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk label type: gpt
Disk identifier: A79FAFAB-C385-47A9-91DE-8DAE3638D3B6


#         Start          End    Size  Type            Name
 1         2048       411647    200M  EFI System      EFI System Partition
 2       411648      2508799      1G  Microsoft basic 
 3      2508800   7126390783    3.3T  Linux LVM       

Disk /dev/sdg: 31.5 GB, 31457280000 bytes, 61440000 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: dos
Disk identifier: 0x6b8b4567

   Device Boot      Start         End      Blocks   Id  System
/dev/sdg1   *           0     9203711     4601856    0  Empty
/dev/sdg2            2428       20027        8800   ef  EFI (FAT-12/16/32)

Disk /dev/mapper/centos00-root: 53.7 GB, 53687091200 bytes, 104857600 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/mapper/centos00-swap: 4294 MB, 4294967296 bytes, 8388608 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/mapper/centos00-home: 3589.4 GB, 3589443420160 bytes, 7010631680 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes

WARNING: fdisk GPT support is currently new, and therefore in an experimental phase. Use at your own discretion.

Disk /dev/md124: 7297.4 GB, 7297426259968 bytes, 14252785664 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 65536 bytes / 131072 bytes
Disk label type: gpt
Disk identifier: D35BF7AC-E685-41C8-9006-8B70E90E54E0


#         Start          End    Size  Type            Name
 1         2048  14252783615    6.7T  Linux LVM       

Thank you in advanced for anyone willing to give some input on this issue.

recover private key – Lost my original Wallet.dat in which I gor the bitcoing

What do you mean by your “Bitcoin Key”? You then talk about “Private Key”. Are you talking about different things?

How can I get to know my Private Key?

That’s what your wallet.dat contained. Obviously you cannot magically get that back if you’ve lost your wallet.dat. Otherwise, Bitcoin would be with $0 as anyone could just “make up” private keys with any amount of Bitcoin. Please use logical thinking.

I have no idea why you seem to think that installing Bitcoin Core would somehow retrieve a long-deleted wallet.dat.

Help to recover BTC

In 2013 i purchased some BTC. From the guy that sold me i have recieved some text and password. The text has 76 signs. Starts with AAQ and has + sign. Also has upper and lower case letters and numbers and 12 charecters pass.The instructions that I remember were: go to bitcoinadress.org and there copy adress and key which have balance 0 then use pywallet to create wallet.dat file and insert it to bitcoin core wallet. But I cant rememer what to do with recieved text.I had instructions but deleted form HDD. Can somebody help me what I need to do.

Thanks

Regards

How do I recover my missing spooled printer files

I hope someone can help. For sometime I have had paper pick-up mechanism printer problems because there aren’t any rubber roller spares for my A3 QMS2060 laser printer. I have been printing urgent files with hand feeding the printer and left the others spooled and paused in the printer queue. When I got to 391 printer files spooled and paused I invested in a new Ricoh A4 printer! It installed and works fine. I have since got in a muddle trying to change the spooled files to print on the new printer. I changed the printer from the QMS one to the Ricoh in Printer & Faxes and all the 391 paused files were changed to Ricoh. When the one I tried didnt print I tried to undo what I had done. The computer locked up and I had to CTRL_DEL_Back and reboot. Now Printer & Faxes reports 0 spooled files for both the QMS and Ricoh printers. The reboot may have cleared the files but I haven’t deleted anything or saved anything so I am hoping the file still exists perhaps as a back-up file. A lot of downloads and work was in the spooled files!!
System XP Pro v3