Trim whitespace (trailing newline) at the end of included Twig template

I’m trying to include a Twig template inside another, but there is undesirable whitespace which is caused by the trailing newline in the included template.

My use case is that the include takes place mid-sentence, just before a comma, and I don’t want any whitespace before the comma.

Base template:

Né le {{ include("date.html.twig", {date: date}) }}, décédé le…

Included template:

<time datetime="...">
  {{- date.format() -}}
</time>

Desired result :

Né le 6 mai 1977, décédé le…

Actual result :

Né le 6 mai 1977 , décédé le…

I can confirm the trailing newline is the cause of the issue, but removing it is not a viable solution to me since most tools are configured to add it if it’s missing.

Is there any way to trim this trailing newline?

8 – How can I trim a field’s value for display?

In Drupal 7, on a content type’s “Manage display” tab, it was possible to trim strings to a particular length, by setting the field’s format to “Trimmed”.

For example, you could trim a long text field to 200 characters for the Teaser mode.

This doesn’t seem to be possible in Drupal 8 – I don’t have the option to set a custom-field’s format to “Trimmed”. (The only option available is “Plain text”.)

Has the “Trimmed” format indeed been removed for custom fields? If so, is there a way to get it back?

Or, is there a module that will allow me to trim field values for display via some other means? (I looked, but couldn’t find one.)

Thanks.

php7 – create_function obsolete php 74 return trim

Good morning i have a code snippet that uses create_function. I've already checked other answers to similar problems, but I'm still in doubt about using return trim.

ok this is the fragment

$q('search_terms') = array_map(create_function('$a', 'return trim($a, "\"'\n\r ");'), $matches(0));

So convert to not use create_function

I think of something like that, but it makes mistakes …

$q('search_terms') = function($a) { return trim($a, "\"'\n\r ");') }, $matches(0);

Arch Linux – SSD Trim under Archlinux

I have heard a lot of different opinions about SSD Trim and usually it is not very important to know how it is handled because you know that it is handled apart from … if I use systems where most of the installation steps are manual how Arch Linux. The Arch Linux documentation explains some ways to configure SSD trimming (continuous, periodic … etc. etc.). However, it does not specify whether the kernel trims by default on a supported file system without an additional configuration step. Can I safely skip manual configuration of continuous or periodic trimming in the documentation? How do I monitor these types of operations? Would I be safe for a new installation with a Kernel 5+ and ext4 as fs without using one of the approaches explained in the documentation (https://wiki.archlinux.org/index.php/Solid_state_drive)? Should I worry about blowing up my house long term because I never cut an SSD hard drive when Arch Linux silently pretended to be healthy? 🙂 🙂

Trim Diet 800

I'm on Pound Watcher's plan, and all you devour is a key to excess fat. This applies to everyone, not just those who specialize in dieters. Responsibility for recording your eating routine draws your attention to how much food you give your body. For the most part, we eat a lot beyond the time we notice. Recording in a food diary is an imperative rude awakening. I made this report so people like you make a decision today, maybe you like …

Trim Diet 800

sed – how to trim some words in column 2 to display them in a text file

Original:
& # 39; abc & # 39 ;, & # 39; X: 1234 & # 39 ;, & # 39; cde & # 39 ;, & # 39; YYY & # 39 ;, & # 39; XYZ & # 39;
"abc", "X: 2345", "cde", "YYY", "XYZ"

If you want the following result, in which the 2nd column is cut to 4 characters, you want 6 characters before.
& # 39; abc & # 39 ;, & # 39; X: 12 & # 39 ;, & # 39; cde & # 39 ;, & # 39; YYY & # 39 ;, & # 39; XYZ & # 39;
& # 39; abc & # 39 ;, & # 39; X: 23 & # 39 ;, & # 39; cde & # 39 ;, & # 39; YYY & # 39 ;, & # 39; XYZ & # 39;

I only know how to get the 2nd bleed column, but I don't know how to display all of them
awk -F, -vOFS = "," & # 39; {print substr ($ 2,2,4)} & # 39; test.txt> test2.txt
Result:
X: 12
X: 23

For crop marks, please indicate that all columns should be displayed at the same time.
Thank you for your help!

Russian – Luxe Trim Tips for the success of Luxe Trim 1 | Proxies-free

Luxury paneling 1
Robin says I love this thing because it makes me lose 8 pounds in 3 months. I was slow before I started this thing, but at that point I stay energized all day. You should try this formula in the same way.

http://topdietbrand.com/luxe-trim-1/

https://topdietbrands.wordpress.com/2019/12/19/luxe-trim-1/

https://twitter.com/luxetrim_1

r – Extend the navigation bar or trim the right sidebar in a glossy dashboard

I have a Shinydashboard below, where I disabled the header and added it to a navigation bar with tab panels. The first tab contains the sidebar of the body and the right sidebar, and the second contains nothing. My problem is that the navigation bar does not go well with the right sidebar, which I always want to enable. Is there a way to extend the navigation bar or trim the right sidebar?

library(shiny)
library(shinydashboard)
library(shinydashboardPlus)
ui <- fluidPage( navbarPage(title = "AA Tester", windowTitle ="AA Tester", id="tabactive", 
                            tabPanel("Explore Funds",icon = icon("table"),tags$body(class="skin-blue sidebar-mini control-sidebar-open",
                                                                                    dashboardPagePlus(sidebar_fullCollapse=TRUE,
                                                                                                                                                          dashboardHeaderPlus(disable = T,
                                                                                                                                                                              enable_rightsidebar = TRUE,
                                                                                                                                                                              rightSidebarIcon = "gears"





                                                                                                                                                          ),


                                                                                                                                                          dashboardSidebar(),

                                                                                                                                                          dashboardBody(

                                                                                                                                                          ),
                                                                                                                                                          rightsidebar = rightSidebar(
                                                                                                                                                            background = "dark",
                                                                                                                                                            rightSidebarTabContent(
                                                                                                                                                              id = 1,
                                                                                                                                                              title = "Controllers",
                                                                                                                                                              icon = "desktop",
                                                                                                                                                              active = TRUE





                                                                                                                                                            ))


                            ))),
                            tabPanel("Holdings Analysis",icon = icon("line-chart"))))
server <- function(input, output, session) {}
shinyApp(ui = ui, server = server)