I have a kernel version 4.15.0-76-generic in Xubuntu 18.04, the WLAN card is Qualcomm Atheros AR9565 Rev: 1 and used ath9k Driver, I can update this driver ath10k without problems? thank you vladi
I have a Thinkpad E495 with an AMD Ryzen 7 with integrated graphics. I use the standard open source amdgpu driver and Xubuntu 18.04.4-LTS. If I stop in any way, e.g. For example, through the menu or by setting the Energy Manager to stop when you close the laptop lid, it appears to stop properly (i.e. the Energy LED is blinking slowly). When you continue (on / off switch or opening the lid), the indicator on the on / off switch lights up continuously, but the background lighting of the screen is never switched on. The screen just stays dark. I searched the forum and tried a number of suggestions (removing Light-Locker and using xscreensaver or xfce4-screensaver) and I still haven't found anything that works. Any suggestions?
I have Xubuntu 18.04 with Linux 5.x kernel version. I have already tried to install the Nvidia driver via PPA:
sudo apt install nvidia-304
But does not work. I also tried to install the NVIDIA 304.137 driver with the following patch:
Nvidia drivers cannot be installed on Ubuntu 18.04
And does not work ..
Do you have any idea ??
Thank you very much
Wine start menu entries are usually created under Wine Programs in the main menu.
And these files come from ~ / .local / share / applications / wine / Programs.
I recently deleted some menu items, but must have deleted something important because I now have a different behavior.
Files are read from ~ / .config / menus / applications-merged
and ~ / .local / share / desktop-directorys.
The applications in the menu are all moved to the main folder Menu / Wine / ("Everything Right Here").
I was just trying to delete everything and deleting and reinstalling wine, but the behavior remains.
How do I restore the simpler and cleaner behavior I'm familiar with?
The desktop in question is XFCE.
I am trying to install Ubuntu 18.04 from USB on my asus vivobook x509u. Delivered with Windows. When I go through the installation process, I never see the automatic partitioning options screen, like "Erase disk and install Ubuntu", but I am taken straight to the manual partitioning screen.
When I partition manually, I get an error that partitioning has failed (tried several times, including the following steps).
It is a new laptop with pre-installed windows. There is only one partition C drive, or we can say OS drive.
I can't install Ubuntu at all with this problem. Does anyone know why this would happen and how I can handle it?
I use Xubuntu 04/18. There is an annoying problem.
When I open or save a file, the sorting in this dialog box is strange: it is sorted by name regardless of the files or directories. Directories are not listed first.
Is it possible to change this somehow? I have no ideas.
I recently bought a cheap laptop from Asus (VivoBook S15 X530UF) and with Xubuntu 19.10 I got everything up and running quickly (except for the laptop lid behavior, which I'll leave for another thread). During the boot process, the Asus logo was only displayed in front of the GRUB with the kernel version 5.3.0-24, followed by the Plymouth and the LightDM greeter. And that was how I wanted it. Except for a console message regarding the location of the swap partition, which I hidden after creating a "Splash" file with "FRAMEBUFFER = y" in "/etc/initramfs-tools/conf.d".
After the last kernel image update (5.3.0-26), the Asus logo showed up between everything: between Grub and Plymouth, between Plymouth and Greeter and also when shutting down, in front of the Plymouth – which then does not happen Booting with version 5.3 .0-24. I just don't like this "ASUS looking for the incredible" logo that shows up all the time. After some searching I found this thread from the Archlinux wiki and after manually deactivating the delayed takeover by editing the grub entry:
linux /boot/vmlinuz-5.3.0-26-generic root=UUID=4b59be32-68e7-4a01-98c8-143e880579ca ro quiet splash $vt_handoff fbcon=nodefer
It no longer appears before the greeter and during shutdown, but it does appear between GRUB and Plymouth during startup. Why, what am I missing here? I would like to understand that a little better and, if possible, only have the logo before starting the computer in front of the GRUB menu.
OK, I know this has already been answered, but I can't add this to the original thread.
I have had this problem since installing 18.04. Now I'm replacing it with Xubuntu (much better OpSys, but that's another discussion!)
I'm using a Northgate Intel CPU with AMD Bios. There is an option to specify the operating system – recommended to choose Win 7. I left it at that because (apparently) there is no Linux choice. BUT there is an Andriod choice !!!
Problem solved! I just say & # 39;
Firefox Developer Edition current, v70, Ubuntu 18.04
.ts Video is played well, but audio is played very distorted, very deep, as if the audio had been incredibly slowed down (even though it is playing at the same speed). I tried restarting without addons to no avail.
Any idea why this file format plays Deep Sounding from Firefox? However, it plays flawlessly when downloaded via mplayer or VLC, so I encounter a problem with a codec or back-end library that Firefox may be using.
I am trying to set up my Ubuntu environment according to the recommendations of The Odin Project installation setup (https://www.theodinproject.com/lessons/prerequisites). I am trying to set up VirtualBox and Xubuntu so that they can be run from a USB drive so that I can either work on my local computer or my work computer (and I want to install as little as possible on the work computer anyway).
At the moment it seems that I have set up VirtualBox for the setup at https://www.vbox.me/. I created the virtual machine setup according to the instructions and saved the Xubuntu disc image file to the flash drive so I always have it with me. However, when I start the virtual desktop, I get the following error: Virtual machine startup error
I am using a 128 GB solid-state flash drive from Sandisk and am trying to follow all recommendations on the Odin project website.